Aiwa XR-M88 Bedienungsanleitung PDF herunterladen (Seite 18)

TIMER PLAY AND TIMER

RECORDING___________

-TIMER

c:>ooo

dbocDO

C3000

____

|apoc3C3 QIQQH —

®-i

ooo ®00

POWER

SHIFT

-II

The system can be turned on at a specified time every day with

the buiit-in timer.

Make sure the clock is set correctiy. (See page 7.)

Use the remote controi.

1 Prepare the source and recording destination.

To listen to a CD, press the CD button on the remote control

and load a CD.

To listen to or record from a radio broadcast, press the

TUNER/BAND button on the remote control and tune in to a

station.

To listen to or record from the connected equipment, press

the AUX/MD button on the remote controi repeatedly until the

corresponding source appears on the display, and set the timer

of the equipment to start playing at the required timer-on time.

2 Press theTIMER button repeatedly while pressing

the SHIFT button on the remote control to display

“TIMER ©PLAY” (for timer play) or “TIMER

0REC” (for timer recording).

TIMER 0REC

TIMER ©PLAY : for timer play

TIMER ©REC ; for timer recording

3 Within 4 seconds, designate the timer-on time by

pressing the ◄◄ or ►► button.

Pressing the ◄◄ button once will move the time back by 1

minute, and pressing the ►► button once will advance the

time by 1 minute.

Holding these buttons down will vary the time in 10-minute

units.

4 Press the

button.

When timer play is selected;

EM 1 20:-

When timer recording is selected:

EM R120..

5 Select the duration for the timer-activated period

with the ◄◄ or ►► button.

C;:D

/ ii ^

Timer-activated period

The duration for the timer-activated period can be set between

5 and 240 minutes in 5-minute steps.

6 Press the

button.

If 4 seconds elapse without the II button pressed, the timer

set in steps 1 through 5 becomes effective.

7 For timer recording, load the tape to record on.

8 Press the POWER button to turn the system off

after adjusting the volume and tone.

off (timer standby mode).

Note, however, that everything on the display will clear if the

power economizing mode (see page 7) is activated. To confirm

the timer standby mode, press the MODE button while

pressing the SHIFT button on the remote control to turn off

the power economizing mode.

When the timer-on time is reached, the system turns on and

begins play (or recording) with the selected source.

If the volume level was set to higher than 21 when the power

was turned off, it is automatically set to 21 when the system

turns on by the timer.

1 8 ENGLISH

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Aiwa XR-M88 Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Akustik Aiwa XR-M88